Step 7 Attach the arm assembly
1
Hang the TV, with the brackets attached, on the upper lip of the arm assembly (A), as shown below.
2
Lower the bottom edge of the of the horizontal TV bracket (D) to the bottom of the arm assembly (A).
3
Secure the arm assembly (A) with the 8-32 x 3/8" cap screw (W) using a phillips screw driver. Do not
overtighten the screw.
14
D
A
You'll need
Phillips screwdriver
W (1)
Need help? Call 800-620-2790
RF-TVMFM02V2 TV Wall Mount
HEAVY! You will need
assistance with this step.
D
A
A
W