4 Configuring the server on the
network
Before you begin
When first powering on the storage server you need to have some
configuration data readily available to complete the
Complete the
initialize the storage server.
Table 4 Server configuration worksheet
Configuration Worksheet
Administrative Identity
User name
User password
Alert E-mail Notification
E-mail address
alert sent to
E-mail address
alert sent from
SMTP server
name or IP
address
SNMP Settings (to be completed only if needed)
Contact person
HP ProLiant DL380 G4 Storage Server installation guide
Server configuration worksheet
Rapid Startup
and use the data collected to
Change system administrator's user
name, which is set by default to
administrator.
Change system administrator's password,
which is set by default to hpinvent.
E-mail address for critical, warning, or
informational messages about server
status.
Must be a valid, well-formed e-mail
address that will appear as the sender of
server status e-mail alerts.
Must be an e-mail server on your network
that supports the Simple Mail Transfer
Protocol (SMTP).
System administrator for the storage
server. The contact and location will be
provided to any SNMP management
computer that requests them.
Wizard.
39