HP ProLiant DL380 G4 Installation Manual page 40

Configuration Worksheet
System location
Community
name No. 1
Trap
destination
No. 1
Community
name No. 2
Trap
destination
No. 2
Network Interfaces (to be completed for non-DHCP configurations)
Local area
connection 1
IP address
Subnet mask
Default
gateway
Local area
connection 2
IP address
Subnet mask
Default
gateway
40
Configuring the server on the network
Any text string, such as a location or
phone number. For example, Floor
#3, Financial Services Bldg.
The community name is used for network
authentication when sending outgoing
SNMP messages.
The IP address of a management
computer that will receive SNMP
messages from the storage server using
the above community name.
Same as above.
Same as above.
A local area connection is automatically
created for each network adapter that is
detected.
An Internet Protocol (IP) address is
assigned to the server. If it is not
automatically assigned, enter the IP
address that you want to assign to this
server.
A mask is used to determine what subnet
an IP address belongs to.
The gateway in a network that the
network adapter will use to access all
other networks.
Any additional local area connections
can be renamed to prevent confusion.
Same as above.
Same as above.
Same as above.