Installation And Configuration Checklist - HP ProLiant DL380 G4 Installation Manual

Table 3 Installation and Configuration checklist
Steps
1. Unpack server, check kit
contents, and become familiar
with front and back panels of
storage server. Locate and
write down serial number of
storage server.
2. Complete rail installation
instructions.
3. Connect cables; (optional)
connect a keyboard, mouse,
and monitor; power on server,
and log in to the server.
4. Access the HP Storage
Server Management console.
• Direct attach method
• Remote browse method
• Remote desktop method
• iLO method
5. Complete the storage server
configuration worksheet.
6. Run Rapid Startup Wizard.
7. Complete system
configuration.
8. Configure storage server
for Web access, if necessary.
HP ProLiant DL380 G4 Storage Server installation guide
Reference
See "Checking kit
contents" on page 22.
See the HP ProLiant rail
installation instructions, if
applicable.
See "Cabling the
server" on page 26,
Powering on the
Direct attach method.
See "Accessing
the HP Storage
Server Management
console" on page 31.
See "Server configuration
worksheet" on page 39.
See "Rapid Startup
Wizard" on page 42.
See "Complete system
configuration" on page 43.
See "Configuring storage
server for Web access
(optional)" on page 45.
server, and
19