Using The Integrated Lights-Out Method - HP ProLiant DL380 G4 Installation Manual

2. Enter the serial number of the storage server in Computer box and
click Connect.
NOTE:
You can substitute the IP address for the serial number, if
you are connected through DHCP.
3.
Log in to the HP ProLiant Storage Server Management console with the
default user name administrator and the password hpinvent.
NOTE:
You can change the administrator name and password
when you configure the server using the
Wizard" on page 42.
4.
To complete network configuration using the Rapid Startup Wizard,
see "Configuring the server on the

Using the Integrated Lights-Out method

The HP iLO management processor provides multiple ways to configure,
update, operate, and manage servers remotely. The HP ProLiant storage
server comes preconfigured with iLO default factory settings, including
a default user account and password. If iLO is connected to a network
running DNS or DHCP, you can use it immediately without changing any
settings.
HP ProLiant DL380 G4 Storage Server installation guide
"Rapid Startup
network" on page 39.
35