Comfortable Adjusting; Seat Height Adjustment; Seat Rotation; Armrest Width Adjustment - X-TREME XMB-400 Owner's Manual

WARNING! Remove the key from the key switch before adjustments. Never attempt to
make adjustments while the scooter is in motion.
Before operating your XMB-400 Mobility Scooter, you may find you need to make some
adjustments to increase your comfort while riding, such as seat height, armrest width and
tiller angle.

SEAT HEIGHT ADJUSTMENT

1. Pull back the seat lock lever under the right side of the seat to unlock the seat.
2. Lift the seat up and off the scooter (See Fig. 7, page 16).
3. Grab hold of the pin loop and pull out the pin (See Fig. 5, page 15).
4. Slide the seat post up or down to change the seat height to your desired height.
5. Reinsert the pin.
6. Reinstall the seat.

SEAT ROTATION

1. Pull up on the seat lock lever to unlock the seat.
2. Rotate the seat to the desired position (See Fig.
13).
3. Release the seat lock lever and it will relock the
seat automatically.

ARMREST WIDTH ADJUSTMENT

1. Find the screws on the armrest adjustment rack
(See Fig. 14).
2. Loosen the screw.
3. Move the armrests inward or outward to the
desired positions.
4. Tighten the screw.

TILLER ANGLE ADJUSTMENT

1. Loosen the lock nuts in the low end of the tiller
(See Fig. 4, page 15).
2. Move the tiller forward or backward to a comfortable position.
3. Tighten the lock nuts.

COMFORTABLE ADJUSTING

18
Figure 13
Fig. 14