Maintenance; Recommended Tools; Adjusting The Head Unit - X-TREME X-500 Owner's Manual

Tire wear will differ based on rider weight, riding conditions and care.
Replacement tires can be obtained at your local X-Treme dealer, through
motorcycle shops, or from the X-Treme website at www.x-tremescooters.com
Tire Pressure
The tire must be inflated to a maximum of 32 P.S.I. It is also recommended to
use a tube additive like Slime, available from any motorcycle shop, to avoid
inconvenient punctures.
Empty all air from the tire, prior to loosening the bolt to split the rim.

MAINTENANCE

RECOMMENDED TOOLS

To adjust and service the X-Treme X-500 you will need the following tools:
 Allen Wrenches: 3/4/5/6 mm
 Wrenches: 10/13/13 mm Open end wrench
 Large Adjustable Crescent Wrench
 Philips Head Screwdrivers
 Oil, Grease or Lubricant

ADJUSTING THE HEAD UNIT

The head unit will come adjusted from the factory. However, riding on rough
terrain and general use may cause the head unit to become loose over time. It
may be necessary to adjust the head unit from time to time.
To adjust the head unit:
1. Rotate the handle bar as far right as it will
go to expose the HEAD UNIT. (see fig
left)
2. Using a large adjustable wrench, gently
turn the BEARING LOCK clockwise to
tighten. *DO NOT OVER TIGHTEN OR
IT WILL DAMAGE THE BEARINGS.
Page11