Secondary Schedule - D-Link SecuriCam DCS-2100+ Manual

Using IP surveillance Software (continued)
Scheduling (continued)
Digital Input
In the figure above, there are four conditions for the digital input. Check the
condition that you would like to record while the condition triggers.
high
Checking this will trigger recording while the digital input is high.
low
Checking this will trigger recording while the digital input is low.
rising
Checking this will trigger recording while the digital input is
changing from low to high.
falling
Checking this will trigger recordingwhile the digital input is changing
from high to low.
Schedule in Continuous mode
If you select Continuous mode in the schedule mode selector, it will record
continuously during the schedule that is set up by the user.

Secondary Schedule

Secondary schedule is the time that is outside the primary schedule.
Schedule modes
There are three modes in the secondary schedule: Disable, Event mode, and
Continuous mode. You can either disable the secondary schedule or choose
the event or continuous mode. These two modes are the same as the primary
schedule. Please refer to the previous section for more detail.
99