Using And Configuring The Dcs-2100+ With A Nat Router - D-Link SecuriCam DCS-2100+ Manual

Enhanced 2.4 ghz wireless internet camera
Hide thumbs Also See for SecuriCam DCS-2100+:
Table of Contents

Advertisement

Using & Configuring the DCS-2100+
with a NAT Router
D-Link's DCS-2100+ is a versatile and cost effective Internet Camera offering
both video and audio monitoring. It can also serve as a powerful surveillance
system in security applications. The DCS-2100+ can be used with any wired
or 802.11b wireless router. This section explains how to view the camera from
either the Internet or from inside your internal network.
Materials Needed:
1 DCS-2100+ Internet Camera
1 Ethernet Cable
A Wired or Wireless router such as the D-Link DI-614+ Wireless Router
Ethernet based PC for system configuration
SETTING UP THE DCS-2100+ FOR USE BEHIND A ROUTER
Installing a DCS-2100+ Internet Camera on your network is an easy 4–step
procedure:
Assign a local IP Address to your Internet Camera
View the Internet Camera Using Your Internet Explorer Web browser
Access the Router with Your Web browser
Open Virtual Server Ports for Your Router (Enable Remote Viewing)
This section is designed to walk you through the setup process for installing
your camera behind a router and enable remote video viewing. For the basic
setup of the DCS-2100+, follow the steps outlined in the Quick Installation
Guide.
After you have completed the setup of the DCS-2100+ outlined in the Quick
Installation Guide you will have an operating camera that has an assigned IP
Address. Because you are using a router to share the Internet with one or
more PCs, the IP Address assigned to the Internet Camera will be a local IP
Address. This allows viewing within your Local Area Network (LAN) until the
router is configured to allow remote viewing of the camera over the Internet.
Assign a Local IP Address for Your Camera
Run the IP Installer program from the CD included with the DCS-2100+.
Follow the steps in the Quick Installation Guide to configure the
DCS-2100+. The camera will be assigned a local IP Address that allows it
to be recognized by the router. Write down this IP Address for future
reference.
23

Advertisement

Table of Contents
loading

Table of Contents