Using The Monitor Program - D-Link SecuriCam DCS-2100+ Manual

Using IP surveillance Software (continued)
Monitor Program (continued)

Using the Monitor Program

This section depicts, in detail, how to manipulate the monitor tool.
Connection of the DCS-2100+
Channel:
Once you have the privilege to connect to the DCS-2100+, you can drag and
drop one camera to the video area. Once you have set up the camera in the
video channel, the color of the channel number will turn blue, indicating that the
camera has been added to IP surveillance. If you do not set up the camera for
the video channel, the color of the channel number will be gray. You can now
drag and drop the camera to the video area to monitor the remote video and
apply other features.
There is a unique light signal associated with each channel number. It indicates
the status of the dedicated video channel, whcih is depicted as follows:
Off
The video channel is not connected with any DCS-2100+ yet.
Green
The green light means the DCS-2100+ associated with this
channel number is connected, and the video is monitored in the
video area.
Red
The red light indicates the video from this channel is recording
into the video database. In this mode, you don't have to drag and
drop the channel to the video area. This means that this application
software supports real-time recording with and without real-time
monitoring for the dedicated video channel.
Blink
With the motion detection mechanism set in the DCS-2100+,
the light of the corresponding channel will blink once the motion
event is triggered.
81