Detail Files And Log List - Swann Advanced series Easy Setup Manual

Detail Files and Log List

The Detail Files Screen
This is the main screen you'll use when locating specifi c incidents and recordings. It's
also where you'll need to go to perform a backup to a USB fl ash drive.
For more about using the File List to perform a backup, see "USB Backup" on page
35.
Log List Screen
The event log records all the "events" that the DVR detects, even the ones you've
otherwise told it to ignore.
Type: The type of event the DVR has detected.
Content: The conditions which triggered the type of event, such as motion
detected (MD) or a hard drive failure (HDD) and so on.
Time Point: When the event occurred.
Record: Whether the DVR recorded any footage as a result of the event.
Typically, this will depend on whether the DVR is in ALARM
RECORDING mode when the event occurred.
34 Remember: After making changes to the settings press/click the APPLY button.
Device Management
HDD: For accessing information about your hard drive. This is where
you go to correct or analyze any problem with your hard drive.
Additionally, you'll be able to see at a glance how much recording
time you have left at your current quality settings, as well as being
able to format (erase all data from) the hard drive here. You can
format fl ash drives from this screen as well.
Alarm: For confi guring the DVR's internal buzzer and auto-email settings.
PTZ: The setup window for confi guring the DVR to act as a PTZ (Pan, Tilt,
Zoom) controller. Recommended for advanced users. Requires a
compatible PTZ camera to be connected correctly to the DVR to
function.
Remember: After making changes to the settings press/click the APPLY button. 43