Additional Information; Child Lock; Changing The Clock Format; Changing The Frequency Step - RCA DVD/CD Receiver Speaker System Owner's Manual

Additional Information

Child Lock

Default setting:
Lock Off
This system has a child lock feature that
makes the front panel buttons and controls
inoperative. This is useful when you have set
the wake-up timer and do not want the
system switched on before it activates.
1 Switch the system into standby.
2 Press
SYSTEM SETUP
).
HOME MENU
3 Use the (cursor left/right)
buttons to select 'Child Lock?', then
press .
ENTER
4 Use the (cursor up/down)
buttons to select 'Lock On?' or 'Lock
Off?'.
5 Press to confirm.
ENTER
Changing the Clock
Format
Default setting:
12–Hour
You can choose to display the clock in either
12 or 24 hour formats.
1 Switch the system into standby.
2 Press
SYSTEM SETUP
).
HOME MENU
3 Use the (cursor left/right)
buttons to select '12/24 Hour?', then
press .
ENTER
4 Use the (cursor up/down)
buttons to select either '12-Hour?' or
'24-Hour?'.
5 Press to confirm.
ENTER
74
Changing the Frequency
Step
Default setting:
If you find that you can not tune into stations
successfully, the frequency step may not be
suitable for your country/region.
1 Switch the system into standby.
2 Press
( +
SHIFT
HOME MENU
3 Use the
buttons to select 'FM AM STEP?', then
press
4 Use the
buttons to select 'FM 50 AM 9?' or
'FM100 AM10?' then press
confirm.

Resetting the System

Use this procedure to reset all system settings
to the factory default.
1 Switch the system into standby.
2 Press and hold the front panel
(stop) button for about 8 seconds
until the display shows 'Mem.Clr.?'.
3 Press the front panel
( +
SHIFT
All the system's settings are now reset.
FM100 AM 10
(
SYSTEM SETUP SHIFT
).
(cursor left/right)
.
ENTER
(cursor up/down)
ENTER
+
to
button.