Using The On-Screen Displays - RCA DVD/CD Receiver Speaker System Owner's Manual

Getting Started
1 If the system is not already on,
press
STAND BY/POWER
on.
2 Press
ROOM SETUP
If you have previously set up the room type
and seating position, the display will show
the current room settings.
3 Press .
ENTER
4 Use the (cursor up/down)
buttons to select a room type then
press .
ENTER
Choose one of the following depending on
your room size:
• – Smaller than average room
S
• – Average room
M
• – Larger than average room
L
5 Use the (cursor up/down)
buttons to select a seating position
setting, then press
Choose one of the following depending on
where your main listening position is:
• – If you are nearer to the front
Fwd
speakers than the surround speakers
• – If you are equal distance from the
Mid
front and surround speakers
• – If you are nearer to the surround
Back
speakers than the front speakers
Notes:
• The Room Setup automatically sets up
channel levels and channel delay. If you
have already set the channel levels
manually (see "Setting the Channel
Levels" on page 65), you will see
in the display when you first press
Set?
the
ROOM SETUP
continue, the previous settings will be
overwritten.
• For more detailed surround sound setup,
see "Setting Up Surround Sound" on
page 64.
32
to switch it
.
.
ENTER
Room
button. If you
Using the On-screen
Displays
For ease of use, this system makes extensive
use of graphical on-screen displays (OSDs).
You should get used to the way these work as
you will need to use them when setting up
the system, using some of the playback
features, such as program play, and when
making more advanced settings for audio and
video.
All the screens are navigated in basically the
same way, using the cursor buttons to change
the highlighted item and pressing
select it.
HOME
MENU
ENTER
Button What it does
HOME Displays/exits the on-screen
MENU
display
Changes the highlighted menu
item
ENTER Selects the highlighted menu
item (both
ENTER
work in exactly the same way)
RETURN Returns to the main menu
without saving changes
to
ENTER
RETURN
ENTER
buttons