Playing Discs - RCA DVD/CD Receiver Speaker System Owner's Manual

Notes:
• Throughout this manual, 'Select' means
use the cursor buttons to highlight an item
on-screen, then press
ENTER
• The button guide at the bottom of every
OSD screen shows you which buttons you
will need to use for that screen.

Playing Discs

The basic playback controls for playing DVD,
CD, Video CD and WMA/MP3 discs are
covered here. Further functions are detailed
in the next chapter.
STAND BY OPEN/CLOSE
POWER
DVD/CD
VOLUME
ENTER
DISC 1 DISC 2
DISC 4 DISC 5
DISC SKIP
1 If the system is not already on,
press
STAND BY/POWER
on.
If you are playing a DVD or Video CD, also
turn on your TV and make sure that it is set
to the correct video input.
2
disc tray.
3
.
Load a disc with the label side facing up in
the front-most disc space, using the disc tray
guide to align the disc. (If you are loading a
double-sided DVD disc, load it with the side
you want to play face down.)
If you want to load more discs, press
SKIP
disc tray. You can load up to five discs at
once.
• Do not place discs in the two partially
accessible disc spaces, as it is easy to
misalign them. Use only the front-most
space.
• Do not load more than one disc in a space.
• Before loading or removing discs, always
wait for the disc mechanism to come to a
complete stop.
ENTER
• Do not rotate the disc tray by hand.
DISC 3
Always use the
CD MODE
• Sometimes, when the disc tray
mechanism is moving, the controls are
inoperative.
4
panel) to start playback of the disc
to switch
loaded in the front-most disc space.
Alternatively, use the
remote, or the
front panel to start playback of other discs.
Getting Started
Press
OPEN/CLOSE
Load a disc.
Disc number
(remote or front panel) to rotate the
button.
DISC SKIP
Press (remote) or
buttons on the
DISC
buttons on the
DIRECT PLAY
to open the
DISC
(front
33