Table of Contents
Advertisement
External FM Antenna
Use 75 coaxial cable to connect an external
FM antenna.
75Ω coaxial cable
ANTENNA
FM
UNBAL
75
AM LOOP
ANTENNA
Connecting Auxiliary
Components
This system has both stereo analog inputs
and outputs, as well as a coaxial digital input.
Use these to connect external components,
such as your VCR, MD or CD-R recorder.
Tape deck, etc.
AUDIO
INPUT
AUDIO
OUT
IN
IN
COAXIAL IN
L
ELESS
LINE 2
R
L
LINE 1
TV
• Connect the
analog outputs of an external
playback component.
These include components such as a VCR or
cassette deck. Connect using RCA pin-plug
stereo cables. See also Reducing the TV and
Line Signal Levels below.
• Connect the
the analog inputs of an external
recording component.
These include components such as a cassette
deck, VCR, MD or another recorder with
analog inputs. Connect using RCA pin-plug
stereo cables.
• Connect the
jack on the rear panel to the coaxial
digital output of an external playback
component.
These include digital components such as an
AUDIO
MD player, digital satellite, or a game system.
OUTPUT
Connect using a coaxial digital cable (not
supplied).
Reducing the TV and Line Signal
Levels
Default setting:
Some sources may produce a high signal level
which may produce unpleasant distortion
from the speakers. In such cases, you may
need to reduce the signal level of the auxiliary
source (connected to the
ANTENNA
analog inputs) by switching on the
FM
UNBAL
75
attenuator.
AM LOOP
L
ANTENNA
R
Additional Information
(
) jacks to the
1
LINE
IN
(
) jacks to
LINE
1
OUT
(
COAXIAL IN
LINE
ATT 6dB
or
TV
LINE
)
2
1
79
Hide quick links:
Advertisement
Table of Contents
