Using The Timer Setting The Wake-Up Timer - RCA DVD/CD Receiver Speaker System Owner's Manual

Using the Timer
Setting the Wake-up
Timer
Use the wake-up timer to set the system to
switch on at any time and start playing
whatever source you want.
Note:
The clock must be set to the correct time for
the wake-up timer to work properly (see
"Setting the Clock" on page 31).
STAND BY
POWER
FM/AM
DVD/CD TUNER TV
VOLUME
ENTER
TIMER
SHIFT
1 Select the source you want played.
For example, press TUNER
AM/P-SET on the front panel) to select the
radio as your source.
2 Prepare the source.
For example, tune in the radio station you
want to wake up to.
If you have selected a CD, make sure that it is
stopped.
3
4
reach the timer menu.
5
buttons to select WAKE-UP then
press
6
buttons to select TIMER EDIT then
press
7
Use the
set the hour, then press
minute in the same way, pressing
L1/L2
LINE when you're done.
8
Use the
set the hour, then press
minute in the same way, pressing
when you are done.
After pressing
wake-up indicator lights, and the switch-on,
switch-off times, the function (
and volume are confirmed in the display.
9
mode.
The wake-up timer will not work if the
ENTER
system is left on!
Note:
You can check the timer settings in standby
by pressing
TIMER (SHIFT + 6)
current time.)
( TUNER FM/
Set the volume.
Press
TIMER (SHIFT + 6)
Use the (cursor left/right)
.
ENTER
Use the (cursor left/right)
.
ENTER
Set the switch-on time.
(cursor up/down) buttons to
ENTER
Set the switch-off time.
(cursor up/down) buttons to
ENTER
this last time, the
ENTER
DVD/CD
Switch the system into standby
TIMER (SHIFT + 6)
once to display the
twice to
. Set the
ENTER
. Set the
ENTER
, etc.)
twice. (Press
61