Using The Viewfinder; Using The Lcd Panel; Adjusting The Viewfinder/Lcd Screen - Canon EOS C100 Instruction Manual

Using the Viewfinder

Dioptric Adjustment
Turn on the camcorder and adjust the dioptric adjustment
lever.

Using the LCD Panel

1 Pull the LCD panel 90° up.
2 Rotate the LCD panel 180° left.
3 Push down the LCD panel to adjust it to the desired angle of view.
NOTES
• You can set the LCD screen to black & white (A 34).
• When you use a commercially available lens adapter and the image on
the screen is inverted, you can use the [w Other Functions] > [Custom
Function] > [Scan Reverse Rec] setting to return the image to the
correct orientation.
• If you are not interested in using the viewfinder along with the LCD
screen, you can set [£ LCD/VF Setup] > [LCD/VF Simul.] to [Off] to
conserve the camcorder's power. Even when [LCD/VF Simul.] is set to
[Off], closing the LCD panel will automatically activate the viewfinder.

Adjusting the Viewfinder/LCD Screen

You can adjust the brightness, contrast, color, sharpness, and backlight
of the viewfinder and LCD screen independently of each other. These
adjustments will not affect your recordings.
Operating modes:
1 Open the setup menu for the viewfinder or LCD screen.
[£ LCD/VF Setup] > [LCD Setup] or [VF Setup]
2 Select [Brightness], [Contrast], [Color], [Sharpness] or [Backlight]
and then press the joystick.
3 Adjust the setting and then press the joystick.
• Repeat steps 2 and 3 to adjust other settings as necessary.
NOTES
• If you set an assignable button to [LCD Setup] or [VF Setup] (A 87), you can press the button to open the
respective submenu.
Preparing the Camcorder
Dioptric
adjustment
lever
[£ LCD/VF Setup]
[LCD Setup]
[VF Setup]
[Brightness: ±0]
[Contrast: ±0]
[Color: ±0]
[Sharpness: 2]
[Backlight: Normal]
33