Playback; Clip Index Screen - Canon EOS C100 Instruction Manual

5

Playback

This section explains how to play back clips recorded on an SD card. For details on playing back clips using an
external monitor, refer to Connecting to an External Monitor (A 114). For details on viewing photos, refer to
Viewing Photos (A 123).
Operating modes:

Clip Index Screen

Playback functions are accessed from the clip index screen. To open
the clip index screen, set the camcorder to
Set the Q switch to MEDIA.
• The camcorder switches to
appears.
• Clips recorded at a system frequency other than the one currently
used by the camcorder, cannot be played back. To play back such
clips, change the camcorder's system frequency (A 51) to match
the recordings on the SD card.
1 Clip thumbnail
2 Recording date (month and day only) and time
3 Orange selection frame
4 Recording date and time
* The audio recording mode is only displayed for clips recorded using the [24 Mbps LPCM] bit rate.
mode.
mode and the clip index screen
1
2
3
4
8
5
9
5 Currently selected SD card slot (A 102)
6 Clip number / Total number of clips
7 Clip's start time code
8 Bit rate and audio recording mode* (A 51)
9 Frame rate (A 51)
Playback
6
7
101