Playing Back Clips - Canon EOS C100 Instruction Manual

Playing Back Clips

You can play back clips from the clip index screen. You can control the
playback with the controls on the camcorder or with the joystick and onscreen
joystick guide.
1 Move the orange selection frame to the clip you want to play back.
Ò
2 Press the button to start playback.
• Playback will start from the clip selected and continue until the end of the
last clip in the index screen. When the last frame of the last clip is reached,
playback will be paused.
• Press the Ò button again or press the joystick to pause/resume the
playback.
• Press the Ñ button to stop the playback and return to the index screen.
IMPORTANT
• Observe the following precautions while either of the SD card access indicators is illuminated in red. Failure to
do so may result in permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the SD card compartment cover and do not remove the SD cards.
NOTES
• You may notice brief stops in video or audio playback between clips.
• Playback of clips converted to standard definition (A 109) is limited to only Ð (play) and Ñ (stop). Also,
playback will stop at the end of each clip.
Playback
103