Canon EOS C100 Instruction Manual page 72

Hide thumbs Also See for EOS C100:
Table of Contents

Advertisement

Setting the Time Code
NOTES
• When the frame rate is set to 24P, the frames value in the time code runs from 0 to 23. When the frame rate is
set to 50i or PF25, it runs from 0 to 24. With other frame rates, it runs from 0 to 29.
72
• When pre-recording mode is activated, [Free Run] is set automatically and cannot be changed.
• When you mix drop frame and non-drop frame time codes, there might be a discontinuity in the time code at
the point where the recording starts.
• As long as the built-in rechargeable lithium battery is charged and you selected the [Free Run] running mode,
the time code continues to run even if you disconnect all other power sources. However, this is less accurate
than when the camcorder is on.
• If you set an assignable button to [Time Code] (A 87), you can press the button to open the [¤ TC/UB
Setup] > [Time Code] submenu.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents