Steamfast SF-420 User Manual page 10

OPERATING THE F
1. Make sure that Water Tank is filled with water and placed correctly onto main
unit, and that desired attachment (Lint Remover or Fabric Brush) is securely
connected if you wish to use it (see procedure on page 8 of this manual for
correct connection of attachments).
2. Plug power cord into a convenient 3-prong electrical outlet (FIGURE 8).
3. Switch Lighted On/Off Switch to "On" position (FIGURE 9).
4. Press and hold Steam Button, using care to point Steam Nozzle away from people
and pets. When first using unit, it will take approximately 50-60 seconds to
begin emitting steam. However, once unit is heated, it will not take as long to
begin producing steam when Steam Button is pressed.
NOTE: It is common for unit to produce gurgling sounds and small amounts
of water during the first few minutes of steaming. This is a natural part of the
steaming process. Pointing Steam Nozzle towards the ground and shaking it
gently may help to remove excess water from the Steam Hose more quickly
5. Once steam flow is steady and excess water has been removed from Steam Hose,
you may proceed with your steaming tasks. Refer to Tips for Using the
Fabric Steamer guide on page 11 of this manual for more information about
steaming garments and other fabrics.
6. When you have completed your steaming tasks, immediately switch Lighted
On/Off Switch to "Off" position and unplug power cord from electrical outlet.
Refer to Proper Storage section on page 12 of this manual for information on
proper cleaning and storage of Fabric Steamer.
10
U
SING THE
S
ABRIC
FIGURE 8
Top Innovations, Inc.
F
ABRIC
TEAMER
S
TEAMER
FIGURE 9