Steamfast SF-294 Owner's Manual

Steamfast SF-294 Owner's Manual

3-in-1 steam mop
Hide thumbs Also See for SF-294:

Advertisement

MODEL SF-294
MODÉLE SF-294
MODELO SF-294
3-in-1 Steam Mop
Balai à vapeur 3-en-1
Trapeador a Vapor 3-en-1
Owner's Guide
Mode d'emploi
Guía del Usuario
ENGLISH p. 2
FRANÇAIS p. 20
ESPAÑOL p. 38
KEEP YOUR RECEIPT FOR
WARRANTY PURPOSES
Please read all instructions before use.
GARDEZ VOTRE REÇU AUX
FINS DE LA GARANTIE
Veuillez lire toutes les instructions avant l'utilisation.
GUARDE SU RECIBO A EFECTOS
DE LA GARANTÍA
Lea todas las instrucciones antes de usarlo.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SF-294 and is the answer not in the manual?

Questions and answers

Summary of Contents for Steamfast SF-294

  • Page 1 MODEL SF-294 MODÉLE SF-294 MODELO SF-294 3-in-1 Steam Mop Balai à vapeur 3-en-1 Trapeador a Vapor 3-en-1 Owner’s Guide Mode d’emploi Guía del Usuario ENGLISH p. 2 FRANÇAIS p. 20 ESPAÑOL p. 38 KEEP YOUR RECEIPT FOR WARRANTY PURPOSES Please read all instructions before use.
  • Page 2: Important Safety Instructions

    7. Do not operate unit with a damaged power cord or if the unit has been dropped or damaged. To avoid risk of electrical shock, do not disassemble unit; contact Steamfast Consumer Service for examination and repair. Incorrect reassembly can cause a risk of electrical shock when unit is used.
  • Page 3 10. Do not use unit where aerosol-based products are being used, or where oxygen is being administered. 11. Unit is only meant to be used with recommended SF-294 3-in-1 Steam Mop accessories. Using other types of attachments may cause damage to unit or injury.
  • Page 4: Product Information

    Product Information The following features and accessories are included with your 3-in-1 Steam Mop. Carefully inspect the packing material for all parts listed below. To obtain possible missing parts, refer to Product Support on Pages 17 & 18 of this manual. UNIT FEATURES &...
  • Page 5 • The Steam Nozzle (1) emits the flow of hot, penetrating steam. The Mop Head, Jet Nozzle and Fabric Nozzle all connect to the Steam Nozzle. • The Water Tank (2) is the translucent reservoir where water is held before being transferred to the heat exchange and converted to steam.
  • Page 6 Assembling Your 3-in-1 Steam Mop STEAM MOP SETUP EXTENSION POLE 1. Insert threaded connector on bottom of Extension Pole into pole base on main unit (FIGURE 1-A). 2. Rotate Extension Pole in a clockwise direction as shown to screw it into pole base (FIGURE 1-B).
  • Page 7 MOP HEAD CAUTION: Always allow unit to cool before connecting/disconnecting any accessories. 1. Align Mop Head with main unit as shown (FIGURE 2), so that neck is in line with Steam Nozzle. 2. Slide Mop Head neck into Steam Nozzle, pressing firmly until release button snaps through hole. 3.
  • Page 8 Assembling Your 3-in-1 Steam Mop STEAM CLEANER SETUP JET NOZZLE CAUTION: Always allow unit to cool before connecting/disconnecting any accessories. 1. Align Jet Nozzle with Steam Nozzle as shown (FIGURE 4). 2. Slide Jet Nozzle into Steam Nozzle, pressing firmly until release button snaps through hole. 3.
  • Page 9 SQUEEGEE CAUTION: Always allow unit to cool before connecting/disconnecting any accessories. 1. Align Squeegee with Fabric Nozzle as shown (FIGURE 6-A). 2. Insert tab on Squeegee into slot on face of Fabric Nozzle (FIGURE 6-B). Press in until secure. 3. To remove Squeegee, simply pull it off of Fabric Nozzle. It does not need to be released or otherwise unlocked.
  • Page 10: Filling Water Tank

    Using Your 3-in-1 Steam Mop FILLING WATER TANK NOTE: Do not remove or cut small rubber air valve on top of Water Tank Cap (FIGURE 8-A). Do not turn unit upside-down when Water Tank is full - a small amount of water may leak out. 1.
  • Page 11: General Operation

    GENERAL OPERATION NOTE: Be sure that Water Tank has been filled and all desired accessories are connected before following these steps. 1. For first-time use, remove protective plastic cover that is shipped on electrical plug. Plug power cord into a convenient electrical outlet.
  • Page 12: Steam Cleaning

    Using Your 3-in-1 Steam Mop FABRIC STEAMING CAUTION: When steaming any material for the first time, it is recommended that you test on a small inconspicuous area before proceeding. Do not use on synthetic fabrics, velvet, or other steam- sensitive materials. NOTE: The lowest setting on the Steam Control Dial is recommended to minimize water spotting.
  • Page 13 APPLICATIONS Below is a listing of some possible applications of the 3-in-1 Steam Mop, including recommended settings for the Steam Control Dial. These are intended to provide some general guidelines; as you become more familiar with your steamer; you will likely discover a wide variety of other uses around your home.
  • Page 14 Should you have any questions on how to best utilize you new steamer, please feel free to contact our Consumer Service Department at: 1-800-711-6617 or consumerservice@steamfast.com 14 | ENGLISH...
  • Page 15: Storage & Care

    Storage & Care PROPER STORAGE Preparing your 3-in-1 Steam Mop for storage is quick and simple. When you have completed your tasks, follow the steps listed below. 1. Set Steam Control Dial to and unplug power cord from electrical outlet. “OFF”...
  • Page 16: Troubleshooting

    Troubleshooting PROBLEM POSSIBLE CAUSE SOLUTION Unit fails to heat up. Power Unit is not plugged in. Plug power cord into electrical Indicator Light DOES NOT outlet. illuminate. Steam Control Dial is set to “OFF” Turn Dial clockwise to desired position. steam intensity setting.
  • Page 17: Product Support

    For problems with your 3-in-1 Steam Mop, please refer to the troubleshooting guide located on Page 16 of this manual. Additional inquiries should be directed to our consumer support services through our Web site, www.steamfast.com. If you do not have internet access, you may also contact our Consumer Service Department by telephone, at 1-800-711-6617.
  • Page 18: Accessories And Parts

    When ordering accessories and parts for your 3-in-1 Steam Mop, you may refer to the part numbers below. Replacement parts may be ordered through our Web site: www.steamfast.com You may also contact Consumer Service directly: consumerservice@steamfast.com or 1-800-711-6617 EXTENSION POLE A294-009R- MOP HEAD...
  • Page 19: Warranty Information

    Steamfast, a division of Vornado Air LLC, (“Steamfast”) warrants to the original consumer or purchaser this Steamfast 3-in-1 Steam Mop (“Product”) is free from defects in material or workmanship for a period of one (1) year from the date of purchase. If any such defect is discovered within the warranty period, Vornado, at its discretion, will repair or replace the Product at no cost if the Product is returned to Steamfast postage-paid.
  • Page 20 évaluer ce produit en ligne www.steamfast.com/reviews Steamfast 415 East 13th, Andover, KS 67002 1-800-711-6617 www.steamfast.com consumerservice@steamfast.com V110512...

Table of Contents