Page 1
MODEL SF-475 Fabric Steamer by Top Innovations, Inc. Please read all instructions before use. Mail in your warranty registration card.
Page 2
Fabric Steamer will let you care for your precious fabrics and garments the way you’ve always wanted to. Top Innovations, Inc. would like to invite you to visit our Customer Support Web site www.steamfast.com...
Use caution when filling, to avoid burns from spilling water, or possible electrical shock. 2. DO NOT leave your SF-475 Fabric Steamer unattended when plugged in or not in use. Use only for its intended purpose as indicated in this manual.
Page 4
DO NOT attempt to modify the plug or defeat this safety feature. 10. In order to unplug SF-475 Fabric Steamer, grasp plug and pull smoothly and firmly from outlet. DO NOT attempt to unplug unit by pulling or tugging on cord.
Page 5
The following features and accessories are included with your Steam Cleaner. Carefully inspect packaging material as some parts are shipped inside Styrofoam packaging. To obtain possible missing parts, refer to the Customer Support section on page 13 of this manual. ABRIC TEAMER Top Innovations, Inc. RODUCT NFORMATION EATURES & A CCESSORIES 1.
Page 6
• The Press Pad (15) fits on your hand, allowing you to support the fabric for a more thorough steaming. The Press Pad also protects your hand from being burned by hot steam. ABRIC TEAMER Top Innovations, Inc. RODUCT NFORMATION...
Page 7
NOTE: It is recommended to extend Telescopic Pole to it’s full height during steamer operation. This ensures full extension of Steam Hose for maximum flow of steam. SSEMBLING THE FIGURE 2 Top Innovations, Inc. ABRIC TEAMER FIGURE 3 FIGURE 4...
Use care to properly align attachment as shown (FIGURE 8), so as not to cover up steam holes on nozzle face. 3. Press accessory firmly onto Steam Nozzle, until it fits securely in place. SSEMBLING THE FIGURE 6 Top Innovations, Inc. ABRIC TEAMER FIGURE 7 FIGURE 8...
Page 9
• Point Steam Nozzle towards ground, sink or tub and shake it to force water out of Hose. • Extend Hose vertically as far as possible to allow water to drain back into Water Reservoir. SING THE ABRIC Top Innovations, Inc. TEAMER...
Page 10
Switch to “Off” position and unplug power cord from electrical outlet. Refer to Proper Storage section on page 11 of this manual for information on proper cleaning and storage of Fabric Steamer. SING THE ABRIC TEAMER Top Innovations, Inc. ABRIC TEAMER FIGURE 10 FIGURE 11...
7. Allow to stand for 40 minutes. 8. Drain water-vinegar solution from Water Reservoir. 9. Rinse Water Reservoir with fresh water, drain and repeat until vinegar odor dissipates. 10. Replace Water Reservoir Cap and lower Compartment Lid back down. & S TORAGE Top Innovations, Inc. UIDELINES...
Page 12
Water condensation in Steam Hose. Water Reservoir has been over-filled. Unit has not reached operating temperature. Condensation in Steam Hose. Top Innovations, Inc. UIDE SOLUTION Plug into electrical outlet. Reset Circuit Breaker / Ground Fault Interrupter, or replace fuse. If you need assistance, contact a licensed electrician.
Water Reservoir is too hot to be refilled. Accessories are not being properly installed. Accessories or Steam Nozzle is damaged or otherwise incorrect. CUSTOMER SUPPORT Top Innovations, Inc. & C USTOMER UPPORT SOLUTION Do not try to add any more water. Allow more cooling time before refilling.
ONE YEAR LIMITED WARRANTY (If outside USA, additional shipping charges may apply) Top Innovations, Inc. warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of purchase. This warranty...
Top Innovations, Inc. 6655 Troost Ave. Kansas City, MO 64131 Tel: (800) 711-6617 (816) 584-9700 www.steamfast.com customerservice@topinnovations.com Printed in China PRODUCT SERIAL NUMBER For your convenience, space has been provided below for you to record the serial number of your unit (located on the back or bottom of the unit) for easy reference when contacting our Customer Service Department.
Need help?
Do you have a question about the SF-475 and is the answer not in the manual?
Questions and answers