8. Do not operate unit with a damaged power cord or if the unit has been dropped or damaged. To avoid risk of electrical shock, do not disassemble unit; contact Steamfast Consumer Service for examination and repair. Incorrect reassembly can cause a risk of electrical shock when unit is used.
Page 3
11. Do not use unit where aerosol-based products are being used, or where oxygen is being administered. 12. Unit is only meant to be used with recommended Compact Fabric Steamer model SF-435W accessories. Using other types of attachments may cause damage to unit or injury.
Product Information The following features and accessories are included with your Compact Fabric Steamer. Carefully inspect the packing material for all parts listed below. To obtain possible missing parts, refer to Product Support on Page 10 of this manual for Consumer Service contact information. UNIT FEATURES &...
Page 5
• The Steam Nozzle (1) emits the flow of hot, penetrating steam produced by the Boiler. The Accessory Adapter is designed to fit around the Steam Nozzle, allowing the Fabric Brush or Lint Remover to be used while steaming. • The Boiler Cap (2) is designed to safely contain steam inside the Boiler, while providing easy access to the Boiler’s fill hole.
Using Your Compact Fabric Steamer FILLING BOILER WITH WATER 1. Place Compact Fabric Steamer on a flat, level surface. 2. Make sure power cord is unplugged from electrical outlet. 3. Remove Boiler Cap by unscrewing it in a counter-clockwise direction. This will expose the Boiler’s fill hole.
Page 7
FABRIC STEAMING CAUTION: When steaming any material for the first time, it is recommended that you test on a small inconspicuous area before proceeding. Do not use on synthetic fabrics such as 100% nylon or polyester, or other steam-sensitive materials. NOTE: Be sure that Boiler has already been filled and any desired accessories are connected before following these steps (refer to Page 6 for details).
Storage & Care PROPER STORAGE Preparing your Compact Fabric Steamer for storage is quick and simple. When you have finished your steaming tasks, follow the steps listed below. 1. Unplug power cord from electrical outlet. 2. Allow unit to cool (15 minutes for complete cooling). 3.
For problems with your Compact Fabric Steamer, please refer to the troubleshooting guide located above. Additional inquiries should be directed to our consumer support services through our Web site, www.steamfast.com. If you do not have internet access, you may also contact our Consumer Service Department by telephone, at 1-800-711-6617.
When ordering replacement or optional accessories for your Compact Fabric Steamer, you may refer to the part numbers below. Accessories may be ordered through our Web site: www.steamfast.com You may also contact Consumer Service directly: consumerservice@steamfast.com or 1-800-711-6617 FABRIC BRUSH A435-001R- ACCESSORY ADAPTER PRESS PAD (OPTIONAL –...
All such fees and costs shall be the sole responsibility of Buyer. Please allow at least 1-2 weeks for return of the Product after it is received by Steamfast. For ease of recordkeeping, it is recommended that Buyer staple or attached the original sales receipt to this Owner’s Guide and record the Product serial number (located on the Product specifications decal) here:...
Need help?
Do you have a question about the SF-435W and is the answer not in the manual?
Questions and answers