Advertisement
1. Remove battery cover from the back of the RMT2-IR remote.
2. Verify that dip switches 1 & 2 are in the down (OFF) position.
3. Insert the battery, hold the battery so that you can see the positive side facing up.
The side that is not marked must be facing down.
4. Test the RMT2-IR remote by pressing ONLY one button at a time. The indicator
light on the remote will fl ash once each time you press a button. WARNING: Do not
press multiple buttons simultaneously and do NOT press buttons rapidly. These ac-
tions will cause the remote to reset and steps 1-4 will have to be repeated.
Note: The RMT2-IR* ships with two batteries. One battery is required for operation,
the second battery is complimentary.
* The color of the product shown here may differ from the one you receive.
RMT2-IR INSTALLATION
The optional IR extender allows you to
relocate your HDMI Switcher and still
have IR control of the HDMI Switcher.
This product is Gefen SKU# EXT-RMT-
EXTIR.
5
Advertisement
