Editing Channel Data On Your Computer - Topfield TF 6000 PVR User Manual

6.4 Editing channel data on your computer

To transfer receiver data, perform the following steps:
NOTE
You had better memorize some important data such as video
settings before starting transfer to avoid resetting them.
You can edit the channal data on your computer by using a
channel editor program, Vega. With Vega you can do the fol-
lowings:
• Adding, deleting or modifying satellite entries
• Adding, deleting or modifying transponder entries
• Deleting or modifying service entries
• Adding, deleting or modifying favorite groups
You can not only transfer your channel data to the digital re-
ceiver but also save it as a file, the extension name of which is
std. Vega is available from the Topfield web site,
.
To use Vega, you have to prepare either a USB cable or a RS-232
cable to link the digital receiver with your computer.
6.4 Editing channel data on your computer 51
1. Plug one end of a RS-232 cable (9 pin D-
sub cable) into the RS-232 port on the
digital receiver, and the other end into
the matching port on the other digital re-
ceiver.
2. Turn on both of them.
3. Select the Installation
Transfer Data to Other IRD menu.
4. Restart the digital receiver.
Transfer Firmware