Toshiba SureMark 4610-SJ6 User Manual page 38

v Font C is 8 dots (wide) × 16 dots (high) with the last 2-dot row used for
v Font C, starting with level 38 micro code, is 8 dots (wide) and 20 dots (high) with
The number of characters printed per inch depends on the character size, the
intercharacter spacing, and the chosen font. For example:
v 17 cpi ⇒ 10-dot wide character + 2-dot space (font A) ⇒ 48 characters per line
v 15 cpi ⇒ 10-dot wide character + 3-dot space (font A) ⇒ 44 characters per line
v 12 cpi ⇒ 12-dot wide character + 5-dot space (font B) ⇒ 34 characters per line
v 20 cpi ⇒ 8-dot wide character + 2-dot space (font C) ⇒ 57 characters per line
You can choose the character size of four user-defined character sets (code pages)
or two proportional fonts. The parameter ranges for user-defined character sets are:
v 8 ≤ dot width ≤ 16
v 16 ≤ dot height ≤ 32 (must be a multiple of 2)
The parameter ranges for characters in proportional fonts are:
v 8 ≤ dot width ≤ 32
v 8 ≤ dot height ≤ 32
Notes:
1. Any of the thermal printing fonts can be scaled up to eight times the defined
2. For paper that has a width of 80 mm, the cash receipt print line is 72 mm long.
22
4610- SJ6 Fiscal Printer User's Guide
(1.5 mm × 3.0 mm character height including descenders, 1.5 mm × 2.75 mm
excluding descenders)
descenders.
(1.0 mm × 2.0 mm character height including descenders, 1.0 mm × 1.75 mm
excluding descenders)
the last 2-dot row used for descenders.
(1.0 mm × 2.5 mm character height including descenders, 1.0 mm × 2.25 mm
excluding descenders)
width and eight times the defined height. The scaling factor for the width does
not have to equal the scaling factor for the height. For example, you could
specify twice the width and five times the height.
There are 576 dots per line and 203 dots per inch.