Intermec PB31 User Manual page 61

PB21 and PB31 Mobile Receipt Printer User Guide
4 Start a communications program, like HyperTerminal.
5 Type this command:
<STX><ESC>.y,ush<ETX>
6 Press Enter. You are prompted to enter more information.
7 Type this command:
su -p pass admin.
8 Type this command:
dlk -z
The printer indicates that it is "Upgrading."
9 In the communications program window, click Transfer > Send
File. A dialog box appears.
10 In the protocol drop-down box, select Zmodem.
11 Browse to the firmware upgrade file (.bin) and select it.
Wait approximately 5 minutes for the firmware upgrade to finish.
When the upgrade is complete, the communications program
displays the message, "kernal flashing ok." The printer
automatically reboots.
To upgrade the printer firmware using a communications program
window and Fingerprint
1 Connect your printer to your PC using a serial cable. For help, see
"Connecting the Printer Through the Serial Port" on page
2 Download the firmware upgrade file (.bin) to your PC:
a Go to www.intermec.com.
b Click Support > Downloads.
c Use the Product Category, Product Family, and Product
fields, to select the printer model.
d Click Submit. The available software appears.
e Download the latest firmware version to your PC.
f Extract the .zip file to a folder on your PC.
3 Start a communications program, like HyperTerminal.
Chapter 2 — Configuring the PB21 and PB31
29.
49