A S SE MB LY ST E P
HARDWARE BAG CONTENTS :
SET SCREW (J)
12 mm
Qty: 4
CONSOLE
CONSOLE
HANDLEBAR
SET SCREWS (J)
SET SCREWS (J)
CONSOLE MAST
CONSOLE MAST
A Open HARDWARE BAG .
B Slide LEFT HANDLEBAR to CONSOLE and attach using 2 SET SCREWS (J).
C Attach LEFT HANDLEBAR to CONSOLE MAST using 1 BOLT (K) and 1 ARC WASHER (L).
D Repeat on other side.
NOTE: Look into holes in the right mast before inserting bolts to avoid pinching cables.
YO U ' RE F I N I S HE D!
12
BOLT (K)
120 mm
Qty: 2
HANDLEBAR
POWER SWITCH
CIRCUIT BREAKER
angle view
ARC WASHER (L)
ARC WASHER (L)
BOLT (K)
BOLT (K)
Connect power plug to the treadmill
and connect the cord to a power
outlet. The on/off switch is located
next to the power cord. Flip this
switch to the 'ON' position, so that
the switch is lit. You will hear a beep
and the console will turn on.
ARC WASHER (L)
17 mm
Qty: 2