Horizon Fitness T74 User Manual page 9

A S S E M BLY ST E P 2
HARDWARE BAG 2 CONTENTS :
top view
* Be sure to tighten bolts after all are lined up.
* NOTE: Be careful not to pinch any
BOLT (D)
FLAT WASHER (E)
20 mm
16 mm Diameter
Qty: 4
Qty: 4
1
3
2
WASHERS (E)
BOLT (D)
ASSEMBLED IN STEP 2-C
wires while assembling the masts.
Open HARDWARE BAG 2.
A
Lift the RUNNING DECK until lock
B
latch on side of treadmill is fully
engaged (See step 1).
Remove CONSOLE from box
C
and place out of the way
(See step 2).
D Lower the treadmill RUNNING
DECK from the folded position
by stepping on LOCK LATCH on
lower left side (See step 3).
E
With running deck in lowered
position, place CONSOLE on
upright masts.
F Place FLAT WASHER (E) and
BOLT (D) into LEFT upright
MAST and CONSOLE and
lightly tighten.
G Gently lift RIGHT side of the
console to connect the CONSOLE
CABLE. Carefully tuck wires in
mast to avoid damage. Note: Do
not pinch console cable. Be sure
the console cable prongs are
aligned and the ends are tightly
seated into each other.
H
Repeat steps F-G above to
assemble the right side upright
mast and console.
I
Tighten all bolts completely.