Optical Drive - HP ProBook 4410s Maintenance And Service Manual

Optical drive

NOTE: All optical drive spare part kits include an optical drive bezel.
Description
DVD±RW Double-Layer Drive with LightScribe (includes bezel)
Blu-ray Disc ROM Drive with SuperMulti DVD±R/RW Double-Layer (includes bezel)
DVD-ROM Drive (includes bezel)
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the switch cover and keyboard (see
Remove the optical drive:
1. Position the computer with the right side toward you.
2. Remove the Phillips PM2.5×7.0 screw (1) that secures the optical drive to the computer.
NOTE:
NOTE:
second image below.
3. Insert a flat-bladed screwdriver or similar tool into the optical drive tab access (2) and press the
tab to the right to release the optical drive from the computer.
64 Chapter 4 Removal and replacement procedures
Battery on page
On 15-in models the screw is located in a hole in the top cover. See the first image below.
On 14-in models the screw is located directly below the keyboard ZIF connector. See the
58).
Switch cover and keyboard on page
Spare part number
536416-001
536417-001
536415-001
59).