Modem Module - HP ProBook 4410s Maintenance And Service Manual

4. Remove the Bluetooth module (3) from the base enclosure.
Reverse this procedure to install the Bluetooth module.

Modem module

Description
For use in all countries and regions except Australia and New Zealand
For use only in Australia and New Zealand
Before removing the modem module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Switch cover and keyboard (see
b. Optical drive (see
c. Speakers (see
d. Palm rest (see
e. Top cover (see
96 Chapter 4 Removal and replacement procedures
Battery on page 58).
Switch cover and keyboard on page
Optical drive on page
Speakers on page 67)
Palm rest on page 69)
Top cover on page 83)
64)
Spare part number
510100-001
510100-011
59)