Bluetooth Module - HP ProBook 4410s Maintenance And Service Manual

Bluetooth module

NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
module cable is included in the Cable Kit, spare part number 536539-001 for computers with 15-in
displays, 536538-001 for computers with 14-in displays. See
spare part number information.
Description
For use in all countries and regions except Japan and Asia Pacific countries and regions
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Switch cover and keyboard (see
b. Top cover (see
c. Palm rest (see
d. Hard drive (see
Remove the Bluetooth module:
1. Position the computer right-side up with the front toward you.
2. Disconnect the Bluetooth module cable (1) from the system board.
3. Remove the Bluetooth module cable (2) from the routing path.
Battery on page 58).
Switch cover and keyboard on page
Top cover on page 83)
Palm rest on page 69)
Hard drive on page 72)
Cable Kit on page 41
Spare part number
483113-001
59)
Component replacement procedures
for more Cable Kit
95