Display Assembly On Computers With 14-In Displays - HP ProBook 4410s Maintenance And Service Manual

Display assembly on computers with 14-in displays

NOTE: For information about removing the display from 15-in models, see
computers with 15-in displayson page
NOTE: The display assembly spare part kit includes 2 WLAN antenna transceivers and cables.
Description
For use only with black computers with 14.0-in displays
14.0-in WXGA HD BrightView display assembly
14.0-in WXGA HD BrightView display assembly for use in computers equipped with a webcam
14.0-in WXGA HD AntiGlare display assembly
14.0-in WXGA HD AntiGlare display assembly for use in computers equipped with a webcam
For use only with red computers with 14.0-in displays
14.0-in WXGA HD BrightView display assembly
14.0-in WXGA HD BrightView display assembly for use in computers equipped with a webcam
14.0-in WXGA HD AntiGlare display assembly
14.0-in WXGA HD AntiGlare display assembly for use in computers equipped with a webcam
Before removing the 14-in display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Switch cover and keyboard (see
b. Optical drive (see
c. Speakers (see
d. Top cover (see
e. Palm rest (see
90 Chapter 4 Removal and replacement procedures
77.
Battery on page 58).
Switch cover and keyboard on page
Optical drive on page
Speakers on page 67)
Top cover on page 83)
Palm rest on page 69)
64)
Display assembly on
Spare part number
535844-001
535847-001
535843-001
535846-001
572710-001
572713-001
572709-001
572712-001
59)