[Quality] - Leica D-LUX 5 Instructions Manual

For details on [REC] Mode menu settings, refer to P28.
Set the compression rate at which the pictures are to be stored.
Applicable modes:
[A]: Fine (when giving priority to the picture quality)
[›]: Standard (when using the standard picture quality and increasing the number of
pictures to be recorded without changing the number of pixels)
[ ]: RAWiFine (In addition to the [RAW] settings, a fine-equivalent JPEG image is
simultaneously created.)
[ ]: RAWiStandard (In addition to the [RAW] settings, a standard-equivalent JPEG
image is simultaneously created.)
[ ]: RAW file (When the image is to be edited with a PC in high quality)
¢1 If you delete a RAW file from the camera, the corresponding JPEG image will also be
deleted.
¢2 It is fixed to maximum recordable pixels for each image aspect ratio.
Note
•
If a RAW picture is recorded with the internal memory, it will take time to write the picture data.
•
Refer to P222 for information about the number of recordable pictures.
•
You can enjoy more advanced picture editing if you use RAW files. You can save RAW files in a
file format (JPEG, TIFF etc.) that can be displayed on your PC etc., develop them and edit them
using the software available after registering on the Leica Camera AG homepage (see
separate leaflet).
•
[ ] images are recorded with a smaller data volume than [
•
[PRINT SET] and [FAVORITE] cannot be set to a picture taken by [
Advanced (Recording pictures)

[QUALITY]

¢1
¢1
- 129 -
¢2
] or [ ].
].