Leica D-LUX 5 Instructions Manual page 215

Zoom does not operate properly.
•
Is the [STEP ZOOM]
The subject cannot be locked. (AF track fails)
•
Set the AF area to the distinctive color of the subject if there is a part that is different from the
surrounding color. (P136)
Recorded image may be warped, or nonexistent color is surrounding the
subject.
•
It is possible that the subject may be warped slightly, or the borders get colored, depending on
the zoom magnification, due to the characteristics of the lens. Also, the peripherals of the
image might look warped because the perspective is enhanced when the wide angle is used.
This is not a malfunction.
The LCD monitor turns off although the camera is turned on.
•
The LCD monitor turns off and the status indicator lights when [AUTO LCD OFF]
[ECONOMY] Mode is activated.
The LCD monitor/Electronic Viewfinder EVF1 (available as accessory, see P7)
becomes darker or brighter for a moment.
•
This phenomenon appears when you press the shutter button halfway to set the aperture value
and does not affect the recorded pictures.
•
This phenomenon also appears when the brightness changes when the camera is zoomed or
when the camera is moved. This is because of operation of the automatic aperture of the
camera, and it is not a malfunction.
The LCD monitor flickers indoors.
•
The LCD monitor may flicker for a few seconds after turning the camera on indoors under
fluorescent light. This is not a malfunction.
The LCD monitor is too bright or dark.
•
[POWER LCD] is activated.
(P146) set to [ON]?
LCD monitor/Electronic Viewfinder EVF1
(available as accessory, see P7)
(P32)
Miscellaneous
Lens
- 215 -
(P35) of the