[Quality] - Leica C Instructions Manual

Taking pictures
• For the setting procedures of the menu.

[Quality]

■
Recording modes:
This function allows you to select the file format, e. g. JPEG and/or RAW, and in the
case of JPEG, the compression rate. [RAW] is especially suited for the subsequent
comprehensive editing of the image data using respective software such as Adobe
Photoshop Lightroom
®
Camera AG homepage (→209). The JPEG setting [Fine] delivers higher image quality than
[Standard] due to its lower compression rate, while the latter has the advantage of smaller
files.
■
Settings
[Fine]
[Standard]
[RAW+Fine]
[RAW+Standard]
[RAW]
[3D+Fine]
[3D+Standard]
*
If you delete a RAW file from the camera, the corresponding JPEG file is also deleted.
1
*
You cannot set the resolution. (The pictures are saved using the maximum recordable
2
resolution for each aspect ratio.)
■
About the RAW format
You can perform comprehensive editing of RAW pictures using the available software
available as download after registering your camera at the Leica Camera AG
homepage (→209).
(The edited pictures can be saved in a file format such as JPEG that can be displayed
on your computer.)
, which is available after registering your camera on the Leica
®
Gives priority to picture quality by saving pictures in
JPEG file format with a low compression rate.
Gives priority to file size by saving pictures in JPEG file
format using a standard compression rate.
Saves pictures in JPEG and RAW file format. *
Saves pictures in the RAW file format only. *
Simultaneously saves 3D picture data (MPO) and
pictures in JPEG file format. (Only when [3D Photo
Mode] Scene mode is set.)
- 129 -
(→52)
Using the [Rec] menu
®
1
2