Table of Contents
Advertisement
Chapter 3
Maintaining the Server
If the riser has a card installed, remove the card from the riser.
e.
Install a new PCIe riser:
Step 2
If you removed a card from the old PCIe riser, install the card to the new riser (see
a.
Card, page
Position the PCIe riser over its socket on the motherboard and over the chassis alignment features
b.
(see
c.
Carefully push down on both ends of the PCIe riser to fully engage its circuit board connector with
the socket on the motherboard.
d.
Replace the top cover.
e.
Replace the server in the rack, replace cables, and then power on the server by pressing the Power
button.
Figure 3-19
1
Chassis alignment points for PCIe riser 1
OL-26646-01
3-30).
Figure
3-19). The metal shell of the riser has alignment tabs that fit into slots in the chassis.
Replacing the PCIe Riser
SYS FAN1
SYS FAN2
SYS FAN3
SYS FAN4
SYS FAN5
Installing or Replacing Server Components
1
CPU 1
PCIe 1
PCIe 2
CPU 2
PSU 1
2
Chassis alignment points for PCIe riser 2
Cisco UCS C22 Server Installation and Service Guide
Replacing a PCIe
1
2
3-29
Advertisement
Table of Contents
