Chapter 3
Maintaining the Server
Note
Reconnect all cables to the backplane, including all RAID controller cables and all power cables.
e.
Replace all drives to the server.
f.
Replace the front chassis panel.
g.
Replace the top cover.
h.
Replace the server in the rack, replace cables, and then power on the server by pressing the Power
i.
button.
Figure 3-8
1
2
1 Front panel control board cable connectors
2 Backplane securing screw locations (two on
backplane assembly and two on exterior sides)
OL-26646-01
The side of the ribbon cable end that is colored blue should face upward.
Replacing the Drive Backplane
2
3
SYS FAN1
SYS FAN2
SYS FAN3
SYS FAN4
SYS FAN5
2
Installing or Replacing Server Components
CPU 1
PCIe 1
PCIe 2
CPU 2
PSU 1
3 Location of opening in backplane assembly
for front operations panel ribbon cables
–
Cisco UCS C22 Server Installation and Service Guide
3-15