If You Have A Problem - Hoover Wet/Dry Vacuum cleaner Owner's Manual

If you have a
problem
If a minor problem occurs, it usually
can be solved quite easily by using
the checklist below.
Problem: Cleaner won't run
Possible Cause
Possible Solution
• Not firmly plugged in.
• Plug cleaner in firmly
• No voltage in wall plug.
• Check fuse or breaker.
• Blown fuse/tripped breaker.
• Replace fuse/redet breaker.
Problem: Loss of suction or
air flow
• Possible Cause
• Possible Solution
• Obstruction in hose, wand or tool.
• Clear obstruction.
• Clogged cartridge or foam filter.
• Clean filter as described in
"Maintenance" section.
• Hole/split in hose.
• Inspect and replace hose.
• Automatic shut-off engaged.
• See "Automatic wet shut-off"
section
HOOVER y
THE HOOVER COMPANY, NORTH CANTON, OHIO 44720
R1 4-98 S6530/45/50
son marcas registradas
®
HOOVER and
THE HOOVER COMPANY, NORTH CANTON, OHIO 44720
HOOVER et
THE HOOVER COMPANY, NORTH CANTON, OHIO 44720
are registered trademarks
®
Litho USA
sont des marques déposées
®
56514-018