Table of Contents
Advertisement
TV
A TV-out jack is provided with some models. You can connect a television
set to the TV-out jack on the computer. Follow the steps below.
If a television is connected to the computer, set the TV type in Display
Properties. Follow the steps below.
■
TV single
1. Click start and click Control Panel.
2. Double-click the Display icon to open the Display Properties
3. Click the Settings tab and click the Advanced button.
4. Click Intel
5. Change Video Standard and Apply and OK.
■
LCD/TV Mode (Dual Display Clone / Extended Desktop)
1. Click start and click Control Panel.
2. Double-click the Display icon to open the Display Properties
3. Click the Settings tab and click the Advanced button.
4. Click Intel
5. Select Display Settings and Television tab.
6. Change Video standard and enter OK at Display Settings and
■
There are 10 Video standards in the list, but please select one out of
following three Video standards,
■
■
■
Changing the resolution
If you want to change the resolution, follow the steps below.
1. Click start and click Control Panel.
2. Double-click the Display icon to open the Display properties
window.
3. Click the Settings tab and click the Advanced button.
4. Select the Adapter tab, then select List all modes.
5. Select a resolution from the menu.
User's Manual
window.
®
Graphics Media Accelerator Driver for Mobile, click
Graphics Properties, select Display Devices tab and select
Television in Single Display.
window.
®
Graphics Media Accelerator Driver for Mobile, click
Graphics Properties, select Display Device tab.
Apply and OK at Intel
Property.
NTSC-M (for the United States)
NTSC-J (for Japan)
PAL-B (for Europe)
®
915GM/GMS, 910GML Graphics Controller
Optional Devices
8-9
Advertisement
Table of Contents
