Advertisement
CLEANING AND MAINTENANCE
1. Unplug the appliance and remove the detachable stem.
Note: Do not immerse the detachable stem of the blender into water, as over
time the lubrication on the bearings may wash away.
2. Wash the detachable stem under running water, without the use of abrasive
cleaners or detergents. After washing the stem, place it upright so that any
water which may have gotten into it can drain out.
3. Wash the cup, bowl, beater and blade in warm soapy water. The bowl and the
beater are not dishwasher safe, as the plastic components will deteriorate.
4. Wipe the motor unit clean with a damp cloth. Never immerse it in
water for cleaning, as electric shock may occur.
5. Dry thoroughly.
CAUTION: Blades are very sharp, so handle with extreme care.
6. Reassemble the blender shaft to the motor unit, then place it upright in
the wall bracket (see Fig. 4) or hand it up to save space.
QUICK CLEANING
Between processing tasks, hold the handheld blender in a cup half filled with water
and turn it on for a few seconds.
FIXING THE WALL BRACKET
You can fix the wall bracket as following:
1. Drill two holes in the wall, following the dimensions as
indicated in Fig. 5.
2. Knock two plastic tubes (not supplied) into the holes with a
hammer.
3. Secure the bracket on the wall with two screws.
ENVIRONMENT FRIENDLY DISPOSAL
Advertisement
