Advertisement
CLEANING & CARE
•
The jug and lid are dishwasher safe. Do not wash the blade assembly in the
dishwasher as this can damage the silicone gasket seal. Do not immerse the
blender in water or any liquids.
•
Remove plug from the mains socket and allow the appliance to cool down before
cleaning.
•
Do not immerse the base unit of the appliance in water and ensure no water enters
the appliance.
•
Clean the base unit by wiping it with a damp cloth. A little detergent can be added
if needed.
•
Do not use scouring pads, steel wool, any form of strong solvent so abrasive
cleaning agents to clean the appliance; they may damage the outside surfaces of
the appliance.
•
Clean blade assembly in warm soapy water.
•
To clean the blades, connect the blade assembly and fill the jug halfway with
warm soapy water and function for 30 seconds. Empty the waste water and rinse
with fresh hot water. Repeat if necessary.
To store the blender
1.
Unplug the power cord from the power outlet and clean as above.
2.
Allow the appliance to dry fully.
3.
It's good practice that the blades a reach attached to a cup. This will prevent the
blades from being misplaced and reduce cutting hazards.
4.
Store on a flat, dry level surface out of reach of children.
Advertisement
