Kogan KA700WBLNDR User Manual

700w 1.5l blender

Table of Contents

Need help?

Do you have a question about the KA700WBLNDR and is the answer not in the manual?

Page 2 If the supply cord or plug is damaged, it must be replaced by a Kogan customer service technician in order to avoid a hazard.  Do not operate the appliance if the power cable or the mains plug shows damage or the unit falls to the floor or has been damaged otherwise.
Page 3  Switch off the unit before pulling out the mains plug.  Use only spare parts from Kogan. No liability is taken if incompatible accessories are used with this unit.  Never carry the unit by its power cord.
Page 4 PARTS ITEM 1 ． M easuring cup 2 ． Jug cover 3 ． G lass jug 4 ． G lass jug sealed ring 5 ． B lade components 6 ． J ug holder 7 ． M ain body 8 ． P ower cord & plug 9 ．...
Page 5 OPERATION 1．Connect the power. Please ensure the speed knob is turned to “OFF” before connecting the power. 2．The unit is built with a safety design stopping the motor from running if the glass jug is not sitting and attached to the motor main body properly. 3．Fill the glass jug with the desired ingredients.
Page 6 CLEANING AND STORAGE 1. Do not clean Motor main body, power cord or plug with water. 2. Clean the engine base with a soft, damp piece of cloth and a mild cleaning agent. 3. Fill the glass jug half-full with hot water and a little cleaning agent. Let the unit run on speed 2 until the blending receptacle is clean.