Kogan KAVTABLSTXA Quick Start Manual

•
Remove and discard all packaging materials and stickers before use.
•
•
outdoors, and do not use for any purposes other than its intended use.
Unplug the blender when the work is done.
•
open the jar lid until the motor has completely stopped working.
•
immerse the motor into water for cleaning.
•
•
This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack
•
of experience and knowledge if they have been given instruction concerning use of the appliance
in a safe way and if they understand the hazards involved.
use the appliance near the edge of a countertop or table. Ensure the surface is level, clean
•
and free or water and other substances. Please be aware that vibration during use may cause the
appliance to move in unexpected ways.
use the appliance on (or close to) a hot gas or electric burner, or where it could touch a
•
heated oven or surface.
allow the cord to hang over the edge of a countertop or to become knotted.
•
To avoid electric shock,
•
Installation of a residual current device (such as a standard safety switch on your wall socket) is
•
recommended to provide additional safety protection when using appliances. It is advisable that a
safety switch (with a rated residual operating current not more than 30mA) be installed in the
electrical circuit supplying the appliance.
In order to avoid the possible hazard of the unit starting by itself due to inadvertent resetting of
•
the overload protector on the motor,
or connect the appliance to a circuit that can switch the unit on and off.
operate the appliance with a damaged cord or plug, after the appliance malfunctions, or if
•
the appliance is dropped or damaged in any way. Stop use immediately and contact the Kogan
customer support team.
Before first use, wash the jug with warm soapy water.
•
Only use the blender jug and lid that is supplied. The use of accessories not supplied by Kogan.com
•
may result in fire, electric shock, damage to the unit or personal injury.
Always ensure the appliance is fully assembled securely before operating.
•
If the motor appears to be straining under a heavy load, do not operate continuously for longer
•
than 10 seconds at a time. Allow the motor to rest for 1 minute between uses on heavy loads.
leave the appliance unattended while in use.
•
Keep fingers, hands, hair and clothing away from the blades during use.
•
appliance and unplug at the wall before reaching into the jug.
Be careful when handling or cleaning the jug as the
•
remove the jug from the base while the blender is operating.
•
attempt to use appliance with damaged blades or with any foreign utensils inside the jug.
•
blend boiling hot liquids. Allow the temperature to drop before putting into the jug for
•
blending.
Be careful if hot liquids are being poured into the jug, as it may be ejected out of the jug due to
•
sudden steaming.
expose the jug to temperature extremes. For example do not pour extremely hot liquids
•
into a jug that is cold from having frozen ingredients in it.
Before moving the blender, cleaning or putting it away, always turn the blender off and unplug it at
•
the wall.
run the blender while empty.
•
attempt to sharpen the blades yourself.
•
overfill.
•
. Do not use in moving vehicles or on boats. Do not use
when operating. Children should never be allowed to use this product.
immerse the cord, plug or motor base in water or any other liquids.
attach an external switching device (such as a timer)
unplug the
.