CLEANING AND CARE
•
Before cleaning, disconnect the power cord plug from the power outlet and let the
appliance cool down.
•
Please clean the large blender jug (A4) and storage bottle (A10) immediately after
use.
•
For cleaning, do not use cleaning product with an abrasive effect, solvents, etc. that
could damage the appliance. No part of this appliance is intended for washing in a
dishwasher.
Warning:
To prevent the risk of injury by electrical shock, do not submerge the appliance, power
cord or power plug into water or another liquid.
Quick cleaning of the blender jug
•
It is recommended to perform a quick clean of the blender jug (A4) immediately
after use.
•
Pour clean, cold water into the blender jug (A4) up to the maximum level mark. Add
a small amount of neutral dishwashing detergent and place the lid (A3) atop with
the inner lid (A1) inserted.
•
Place the blender jug (A4) on the motor unit (A6), connect the power cord plug into
the power socket.
•
Press and hold the PULSE/EXTRA (B2) button for approximately 3 seconds, then
release the button. Repeat the process several times to remove ingredients from
the blade assembly (A5) and blender walls using short pulses.
•
Disconnect the power cord plug from the power socket and remove the blender jug
(A4) from the motor unit (A6).
•
Pour out the content of the blender jug (A4).
Cleaning the blender jug and lid
•
After performing a quick clean as above, unscrew the blade assembly (A5).
•
Wash the blender jug (A4), lid (A3), inner lid (A1), vacuum inner lid (A2) and blade
assembly (A5) in warm water with a small amount of neutral dishwashing
detergent using a soft sponge. Rinse and dry thoroughly.
•
You can wash these parts except for (A5) in upper basket of the dishwasher.
Warning:
Be extremely careful when handling the blade assembly (A5) as the edges are very sharp.