Table of Contents
Advertisement
CLEANING AND MAINTENANCE
The Auto Clean feature can clean the blender and blade assembly easily, rapidly and
in complete safety.
-Pour a little warm soapy water into the big cup or small cup and mix for a few
seconds by plugging in the power outlet.
- Remove the cup by turning it anti-clockwise and then rinse under running water.
-Wipe the outer surface of Motor Unit with a damp cloth.
Warning: Do not use abrasive cleaners and NEVER immerse the
Motor Unit in water for cleaning
-Dry all parts and then store them safely away from children.
For complete cleaning, you can hold the blade assembly at the bottom of cup support
carefully, taking extreme care as it is very sharp. Take it out by turning the coupling
on the underside clockwise. Then you can put the Cover, Cup and blade assembly into
the dishwasher for cleaning, as they are all dishwasher safe components. Ensure that
during the wash cycle, the temp setting does not exceed 70 ℃ .
If any problem has been encountered during use never disassemble the Motor Unit by
yourself, no user serviceable parts inside. Contact only the authorized service facility
for examination and repair.
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local regulations: hand in any
non-working electrical equipment to an appropriate waste
disposal centre.
Advertisement
Table of Contents
