Kogan KABLT21BNDB User Manual
Kogan KABLT21BNDB User Manual

Kogan KABLT21BNDB User Manual

Compact bullet blender / mixer system

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for Kogan KABLT21BNDB

  • Page 2: Important Safeguards

    19. Ensure that the blender is switched off before removing it from the stand. 20. If the supply cord is damaged, it must be replaced by a Kogan technician in order to avoid a hazard. Any repairs by another repair company will void the warranty and Kogan will not be responsible for any issues which may arise.
  • Page 3: Know Your Blender

    KNOW YOUR BLENDER...
  • Page 4: Before Your First Use

    Attachments Before your first use: Check that the accessories are complete and the unit is not damaged. Then pour a little water into the big cup and mix according to the steps below for one or two times, and then pour out. Cleaning the Cup and the cup support assembly thoroughly with warm water.
  • Page 5: Using The Blender

    Using the blender Place the motor unit on a flat surface; make sure the power outlet is unplugged. When using the big cup and jar, it must be noted that you should peel or core the fruit or vegetables, and then cut them into small dices. When using the small cup, the volume of food that is being prepared for juicing should not be too large.
  • Page 6 6. Upend the assembly of cup and cup support, and insert them into the motor unit, making sure the three fasteners on the bottom cup support align with the grooves on the motor unit. Then tighten them by turning the big cup or small cup clockwise (see fig.3).
  • Page 7 Fig. 4 8. Connect the plug to wall outlet and the appliance will start operating. Note: Do not run the appliance for more than 3 minutes per time. A minimum of 3 minutes rest period is required between two consecutive cycles. 9.
  • Page 8: Cleaning And Maintenance

    CLEANING AND MAINTENANCE The Auto Clean feature can clean the blender and blade assembly easily, rapidly and in complete safety. -Pour a little warm soapy water into the big cup or small cup and mix for a few seconds by plugging in the power outlet. - Remove the cup by turning it anti-clockwise and then rinse under running water.

Table of Contents