Table of Contents
Advertisement
WARNING LAMPS AND
INDICATORS
The following warning lamps and
indicators illuminate when the ignition is
switched on:
•
ABS
•
Airbag
•
Brake system
•
ESP off
•
Frost
•
Low fuel
•
Stability control (ESP)
If a warning or indicator lamp does not
illuminate when the ignition is switched
on, it indicates a malfunction. Have the
system checked by properly trained
technician.
ABS warning lamp
If it illuminates when you are
driving, this indicates a
malfunction. You will continue
to have normal braking (without ABS).
Have the system checked by a properly
trained technician as soon as possible.
Airbag warning lamp
If it illuminates when you are
driving, this indicates a
malfunction. Have the system
checked by a properly trained technician.
Blind spot monitor indicator
It will illuminate when this feature
is deactivated or in conjunction
E124823
with a message. See Blind
spot monitor (page 75). See
Information messages (page 91).
Instruments
Brake system lamp
Reduce your speed gradually and
stop your vehicle as soon as it is
safe to do so. Use your brakes with
care.
If it illuminates when you are driving, check
that the parking brake is not engaged. If
the parking brake is not engaged, this
indicates a malfunction. Have the system
checked by a properly trained technician
immediately.
Cruise control indicator
E71340
cruise control (page 160).
Direction indicators
indicator bulb. See Changing a bulb
(page 63).
Engine warning lamp
you are driving, reduce the speed of
your vehicle immediately. If it
continues to flash, avoid heavy
acceleration or deceleration. Have the
system checked by a properly trained
technician immediately.
80
It illuminates when the parking
brake is engaged.
WARNING
It will illuminate when you have
set a speed using the cruise
control system. See Using
Flashes during operation. A
sudden increase in the rate of
flashing warns of a failed
If it illuminates with the engine
running, this indicates a
malfunction. If it flashes when
Advertisement
Table of Contents
