E130001
Note: Adhesive pads are supplied to help
reduce the buffeting noise.
Note: Make sure the surface of the
crossbars is clean before attaching the
adhesive pads.
1. Remove the backing and attach the
adhesive pads to the crossbars in the
positions shown.
E130066
2. Pull the handle out.
3. Turn the handle clockwise to bring the
crossbar in contact with the rail.
Load carrying
4 Nm
2
3
4
E130067
Note: Make sure there is no gap
between crossbar and rail (A).
4. Turn the handle a minimum of 3.5
revolutions.
E98208
5. Push the handle in. Turn the key
clockwise to lock.
6. Remove the key.
168
A